5 Tips for Removing Scratches from Wooden Floors in Saugus, MA

Make sure your floors are clean and dry

A lackluster wood surface can increase the look of scratches and worn areas. In addition, dirt particles that are absorbed by flooring can cause scratching that is more serious. Your first line of action should be a thorough yet gentle cleansing. Avoid using brooms and abrasive scrub pads and don't put a floor in a bath of liquid cleaner or water. 

Instead, you can use a soft mop or a vacuum (with the proper attachment) to clean hair, dust and other debris from the surface. To clean, add two to four drops of liquid soap to a quart of water, mix in a spray bottle, and mist your polyurethane-finished floor, then distribute the solution with a dry microfiber mop. 

Then, lightly spray with clean water and then buff using a soft, dry cloth. Commercial non-toxic wood cleaners (water-based, with a biodegradable cleaning agent) safe for polyurethane-finished floors are also available.

Clean up the scratches

A little elbow grease will revive wooden floors. Sandpaper with fine grain is all you require to smooth off any damage. Start by sanding the floor along the grain. The stain will need to be reapplied which you've scrubbed away during the process, so select a safe area (under under the mattress, or in the closet) to test a patch of stain made of wood that is the same color as your floor. 

After you've found the ideal stain, you can patch test an urethane-based finish. A urethane that is water-based will dry quickly and has a clear glossy finish that is ideal for floors with newer construction, but it can cause too much contrast when floors are darkened by the passage of time. They are sour and odourless however, they are dry and have a light yellow tint that gets darker over time, that can complement the hue of a floor that is older. Make sure the sanded surface is clean and smooth before staining and finishing.

Try the natural remedy

Walnuts have excellent natural emollients as well as brown dyes that help repair and improve the appearance of worn, scratched wood. Warm the oil in the nut by using your fingertips, rub it into the damaged areas of the floor in tiny circular movements. Allow the oil to sit for a while before buffing with the help of a soft cloth. 

Coconut oil is also a great way to reduce scratches on wood floors that have not been finished or newly cleaned floors. Apply a thin layer of coconut oil using either a sponge or brush allow it to sit for 5 minutes, and then buff it with the help of a soft cloth to give a richer appearance wood.

Make a powerful refresher using ingredients from your pantry

The combination made of olive oil, baking soda may assist in removing scratches on wood. Clean your floor thoroughly and then apply baking soda that has been diluted with several drops olive oil on damaged areas. After five minutes, apply the paste gently using an easy sponge. Rinse thoroughly using a moist cloth, then dry using the towel

Think about commercial products

Ideal to repair scratches on laminate floors and wood floors. Scratch ScratchAway. Cleans, polishes and minimizes the appearance of scratches caused by shoes, dirt pet hair, furniture scrapes. 

Another product that has been well-reviewed is the Old English Scratch Cover available in the dark and light wood hues. This oil is nourishing and shields and conceals unsightly scratch marks. All you require is a soft cloth that you can apply it to clean wooden surfaces.